Table of Contents
Advertisement
25-12 Remote Node Configuration
In this case, only one set of VPI and VCI numbers need be specified for all
protocols. The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535
(1 to 31 is reserved for local management of ATM traffic).
25.5.3
Advance Setup Options
In menu 11.1, select PPPoE in the Encapsulation field.
Figure 25-9 Menu 11.1 Remote Node Profile
Rem Node Name= MyISP
Active= Yes
Encapsulation= PPPoE
Multiplexing= LLC-based
Service Name=
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login= ChangeMe
My Password= ********
Authen= CHAP/PAP
Press ENTER to Confirm or ESC to Cancel:
Move the cursor to the Edit Advance Options field, press [SPACE BAR] to
select Yes, then press [ENTER] to display Menu 11.8 – Advance Setup
Options.
Figure 25-10 Menu 11.8 Advance Setup Options
Menu 11.8 - Advance Setup Options
PPPoE + PPPoE_Client_PC= No
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.
317516-A Rev 00
Menu 11.1 - Remote Node Profile
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Edit Advance Options= Yes
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedule Sets=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 0
Advertisement
Table of Contents
