Table of Contents
Advertisement
30-16 Filter Configuration
Figure 30-11 Sample Telnet Filter
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
When you press [ENTER] to confirm, the following screen appears. Note that
there is only one filter rule in this set.
317516-A Rev 00
Enter 1 in the menu 21 to display Menu 21.1 — Filter Set
Configuration.
Enter the index number of the filter set you want to configure (in this
.
case 6)
Type a descriptive name or comment in the Edit Comments field (for
example, TELNET_WAN) and press [ENTER].
Press [ENTER] at the message
cancel" to open Menu 21.1.6 — Filter Rules Summary.
Type 1 to configure the first filter rule. Make the entries in this menu as
shown next.
Press [ENTER] to confirm or [ESC] to
"
Advertisement
Table of Contents
