Table of Contents
Advertisement
8.2.1 Configuring Route Entry
In the Static Route summary screen, click a static route index number to display
the screen shown. Fill in the required information for each static route.
Figure 8-3 Static Route: Edit Routing Rule
The following table describes the labels in this screen.
Table 8-2 Static Route: Edit Routing Rule
LABEL
Route Name
Enter the name of the IP static route. Leave this field blank to delete this static route.
Active
This field allows you to activate/deactivate this static route.
Destination IP
This parameter specifies the IP network address of the final destination. Routing is
Address
always based on network number. If you need to specify a route to a single host, use a
subnet mask of 255.255.255.255 in the subnet mask field to force the network number
to be identical to the host ID.
IP Subnet Mask
Enter the IP subnet mask here.
Gateway IP
Enter the IP address of the gateway. The gateway is an immediate neighbor of your
Address
Contivity 251 that will forward the packet to the destination. On the LAN, the gateway
must be a router on the same segment as your Contivity 251; over the WAN, the
gateway must be the IP address of one of the Remote Nodes.
DESCRIPTION
Contivity 251 VPN Switch User's Guide
Static Route 8-3
Advertisement
Table of Contents
