Table of Contents
Advertisement
15-6 VPN Screens
Table 15-2 VPN: Summary
LABEL
The Local Policy IP Address field displays the IP policy's virtual IP address (or range of
addresses) when you enable branch tunnel NAT address mapping in the IP Policy screen.
The Local Policy IP Address field displays a single (static) IP address when the IP
policy's Branch Tunnel NAT Address Mapping Rule Type field is configured to
One-to-one or Many-to-One in the IP Policy screen.
The Local Policy IP Address field displays the beginning and ending (static) IP
addresses of a range of computers when the policy's Branch Tunnel NAT
Address Mapping Rule Type field is configured to Many One-to-one in the IP
Policy screen.
Local Policy IP
The Local Policy IP Address field displays the policy's local IP address (or range of
Address
addresses) when you disable branch tunnel NAT address mapping in the IP Policy screen.
The Local Policy IP Address field displays a single (static) IP address when the IP
policy's Local Address Type field is configured to Single Address in the IP Policy
screen.
The Local Policy IP Address field displays the beginning and ending (static) IP
addresses of a range of computers when the policy's Local Address Type field is
configured to Range Address in the IP Policy screen.
The Local Policy IP Address field displays a (static) IP address and a subnet
mask when the policy's Local Address Type field is configured to Subnet
Address in the IP Policy screen.
The Remote Policy IP Address field displays the IP address(es) of computer(s) on the
remote network behind the remote VPN switch.
A single (static) IP address displays for the Remote Policy IP Address when the IP
policy's Remote Address Type field is configured to Single Address in the IP Policy
screen.
The beginning and ending (static) IP addresses of a range of computers display for the
Remote Policy IP Address when the IP policy's Remote Address Type field is
Remote Policy IP
configured to Range Address in the IP Policy screen.
Address
A (static) IP address and a subnet mask display for the Remote Policy IP Address when
the IP policy's Remote Address Type field is configured to Subnet Address in the IP
Policy screen.
The Remote Policy IP Address displays ALL whenever the Secure Gateway Address
field is set to 0.0.0.0.
When ALL displays, only the remote VPN switch can initiate the VPN.
317516-A Rev 00
DESCRIPTION
Advertisement
Table of Contents
