Figure 3-7 Wizard: LAN Configuration
The following table describes the fields in this screen.
Table 3-6 Wizard: LAN Configuration
LABEL
LAN IP Address
LAN Subnet Mask
DHCP
DHCP Server From the DHCP Server drop-down list box, select On to allow your Contivity 251
Enter the IP address of your Contivity 251 in dotted decimal notation, for example,
192.168.1.1 (factory default).
If you change the Contivity 251's LAN IP address, you must use
the new IP address if you want to access the WebGUI again.
Enter a subnet mask in dotted decimal notation.
to assign IP addresses, an IP default gateway and DNS servers to computer
systems that support the DHCP client. Select Off to disable DHCP server.
When DHCP server is used, set the following items:
DESCRIPTION
Contivity 251 VPN Switch User's Guide
Wizard Setup 3-15