28-10 Network Address Translation (NAT)
Figure 28-9 Menu 15.2.1 NAT Server Setup
Menu 15.2.1 - NAT Server Setup
Rule
Start Port No.
---------------------------------------------------
1.
Default
2.
21
3.
0
4.
0
5.
0
6.
0
7.
0
8.
0
9.
0
10.
0
11.
0
12.
0
Press ENTER to Confirm or ESC to Cancel:
Step 4.
Step 5.
Step 6.
317516-A Rev 00
End Port No.
IP Address
Default
0.0.0.0
25
192.168.1.33
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
Enter a port number in an unused Start Port No field. To forward only
one port, enter it again in the End Port No field. To specify a range of
ports, enter the last port to be forwarded in the End Port No field.
Enter the inside IP address of the server in the IP Address field. In the
following figure, you have a computer acting as an FTP, Telnet and
SMTP server (ports 21, 23 and 25) at 192.168.1.33.
Press [ENTER] at the "Press ENTER to confirm ..." prompt to save
your configuration after you define all the servers or press [ESC] at
any time to cancel.