Table of Contents
Advertisement
H-4 Log Descriptions
Access logs may include the following information:
(Protocol) is the protocol of the packet (for example TCP or UDP) that
triggered the log.
(Direction) is the direction in which the packet was traveling (for example
LAN to WAN or WAN to LAN)
(Rule) is the number of the firewall rule which caused the log.
Chart H-5 Access Logs
LOG MESSAGE
Firewall default
policy (Protocol,
Direction)
Firewall rule match
(Protocol,
Direction, Rule)
Firewall rule NOT
match: (Protocol,
Direction, Rule)
dest port
(Protocol,
Direction)
src port (Protocol,
Direction)
dest IP (Protocol,
Direction)
src IP (Protocol,
Direction)
protocol (Protocol,
Direction)
317516-A Rev 00
DESCRIPTION
Access matched the default policy and the Contivity 251 blocked or
forwarded it according to the configuration of the default firewall
policy.
Access matched a firewall rule and the Contivity 251 blocked or
forwarded it according to the rule's configuration.
Access did not match a firewall rule and the Contivity 251 logged it.
Access did not match a firewall rule's destination port and the
Contivity 251 logged it.
Access did not match a firewall rule's source port and the Contivity
251 logged it.
Access did not match a firewall rule's destination IP address and the
Contivity 251 logged it.
Access did not match a firewall rule's source IP address and the
Contivity 251 logged it.
Access did not match a firewall rule's protocol and the Contivity 251
logged it.
Advertisement
Table of Contents
