Table of Contents
Advertisement
Table 25-3 Menu 11.8 Advance Setup Options
FIELD
PPPoE+
Press [SPACE BAR] to select Yes and press [ENTER] to enable PPPoE pass
PPPoE_Client_PC
through. In addition to the Contivity 251's built-in PPPoE client, you can enable
PPPoE pass through to allow up to ten hosts on the LAN to use PPPoE client
software on their computers to connect to the ISP via the Contivity 251. Each host
can have a separate account and a public WAN IP address.
PPPoE pass through is an alternative to NAT for application where NAT is not
appropriate.
Press [SPACE BAR] to select No and press [ENTER] to disable PPPoE pass
through if you do not need to allow hosts on the LAN to use PPPoE client software
on their computers to connect to the ISP.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
Remote Node Configuration 25-13
DESCRIPTION
Contivity 251 VPN Switch User's Guide
Advertisement
Table of Contents
