Configuring A Server Behind Nat; Figure 28-8 Menu 15.2 Nat Server Setup - Nortel Contivity 251 User Manual

Table 28-4 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set
FIELD
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.

28.5 Configuring a Server behind NAT

Follow these steps to configure a server behind NAT:
Step 1.
Step 2.

Figure 28-8 Menu 15.2 NAT Server Setup

Menu 15.2 - NAT Server Sets
1. Server Set 1 (Used for SUA Only)
2. Server Set 2
3. Server Set 3
4. Server Set 4
5. Server Set 5
6. Server Set 6
7. Server Set 7
8. Server Set 8
9. Server Set 9
10. Server Set 10
Enter Set Number to Edit:
Step 3.
DESCRIPTION
Enter 15 in the main menu to go to Menu 15 - NAT Setup.
Enter 2 to display Menu 15.2 - NAT Server Sets as shown next.
Enter 1 to go to Menu 15.2.1 NAT Server Setup as follows.
Network Address Translation (NAT) 28-9
Contivity 251 VPN Switch User's Guide
EXAMPLE