Figure 32-7 Sample Error and Information Messages
59 Thu Jan 01 00:00:03 1970 PP0f
60 Thu Jan 01 00:00:03 1970 PP00 -WARN
61 Thu Jan 01 00:00:03 1970 PP00
62 Thu Jan 01 00:00:19 1970 PP00
63 Thu Jan 01 00:00:24 1970 PP0a
Clear Error Log (y/n):
32.3.2 Syslog Settings
The Contivity 251 uses the UNIX syslog facility to log the CDR (Call Detail
Record) and system messages to a syslog server. Syslog and accounting can be
configured in Menu 24.3.2 — System Maintenance — UNIX Syslog, as shown
next.
Figure 32-8 Menu 24.3.2 System Maintenance: UNIX Syslog
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= 0.0.0.0
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
You need to configure the UNIX syslog parameters described in the following
table to activate syslog then choose what you want to log.
Table 32-3 Menu 24.3.2 System Maintenance: UNIX Syslog
FIELD
UNIX Syslog:
Active
Use [SPACE BAR] and then [ENTER] to turn syslog on or off.
Syslog IP Address
Type the IP address of your syslog server.
System Information and Diagnosis 32-7
INFO
LAN promiscuous mode <0>
SNMP TRAP 0: cold start
INFO
main: init completed
INFO
SMT Session Begin
WARN
MPOA Link Down
DESCRIPTION
Contivity 251 VPN Switch User's Guide