Nortel Contivity 251 User Manual page 469

Chart I-5
IPSec Commands
COMMAND
debug <on|off>
exemptHost
display
load
active
sourceStart
sourceEnd
destStart
destEnd
save
ipPolicy activeNAT
add
delete
display
internal
list
load
local
Turns the trace for IPsec debug information
on|off.
Use the exemptHost commands to
configure specific IP addresses that are not
to be part of a VPN tunnel.
Displays the exempt host settings.
<index> Loads an exempt host.
<Yes|No> Enables/disables an exempt host.
<IP address> Sets the exempt host's source start IP
address.
<IP address> Sets the exempt host's source end IP
address.
Sets the exempt host's destination start IP
<IP address>
address.
Sets the exempt host's destination end IP
<IP address>
address.
Saves an exempt host.
<Yes|No> Enables/disables NAT for an IP policy.
Adds an IP policy.
Removes an IP policy.
Displays the IP policies.
Displays the IP policies.
<policy Index> Loads an IP policy.
type Sets an IP policy's local address type.
<0:single|1:range
|
2:subnet>
Command Interpreter I-11
DESCRIPTION
Contivity 251 VPN Switch User's Guide