22-6 Menu 2 WAN Backup Setup
22.5 Advanced Dial Backup Setup
Consult the manual of your WAN device connected to your Dial Backup
port for specific AT commands.
To edit the advanced setup for the dial backup port, move the cursor to the Edit
Advanced Setup field in
Menu 2.2 Dial Backup Setup, press the [SPACE BAR] to select Yes and then
press [ENTER].
Figure 22-4 Menu 2.2.1 Advanced Dial Backup Setup
Menu 2.2.1 - Advanced Dial Backup Setup
AT Command Strings:
Dial= atd
Drop= ~~+++~~ath
Answer= ata
Drop DTR When Hang Up= Yes
AT Response Strings:
CLID= NMBR =
Called Id=
Speed= CONNECT
Press ENTER to Confirm or ESC to Cancel:
The following table describes fields in this menu.
Table 22-4 Menu 2.2.1 Advanced Dial Backup Setup: AT Commands Fields
FIELD
AT Command Strings:
Dial Enter the AT Command string to make a call.
Drop Enter the AT Command string to drop a call. "~" represents a one
Answer Enter the AT Command string to answer a call.
317516-A Rev 00
Call Control:
Dial Timeout(sec)= 60
Retry Count= 0
Retry Interval(sec)= N/A
Drop Timeout(sec)= 20
Call Back Delay(sec)= 15
DESCRIPTION
second wait, e.g., "~~~+++~~ath" can be used if your modem has a
slow response time.
EXAMPLE
atdt
+++ath
ata