Nortel Contivity 251 User Manual page 472

I-14 Command Interpreter
Chart I-5
IPSec Commands
COMMAND
load <rule #>
save
config netbios
name
keepAlive
lcIdType
lcIdContent
myIpAddr
peerIdType
peerIdConten
t
secureGwAddr
ike
317516-A Rev 00
Loads an IPSec rule.
Saves IPSec rules.
active <on|off> Sets the NetBIOS active flag.
group <group Sets the NetBIOS group.
index1, group
index2...>
<string> Sets a rule's name.
<Yes| No> Enables/disables keep alive.
<0:IP | 1:DNS | Sets the local ID type.
2:Email>
<string> Sets the local ID content.
Sets the my IP address.
<IP address>
<0:IP | 1:DNS | Sets the peer ID type.
2:Email>
<string> Sets the peer ID content.
<IP address | Sets the secure gateway IP address or
Domain name> domain name.
Sets the IKE phase 1 negotiation mode.
negotiationMode
<0:Main |
1:Aggressive>
preShareKey Sets the IKE phase 1 pre-shared key.
<string>
Sets the IKE phase 1 encryption algorithm.
p1EncryAlgo
<0:DES | 1:3DES>
p1AuthAlgo <0:MD5 Sets the IKE phase 1 authentication
| 1:SHA1> algorithm.
p1SaLifeTime Sets the IKE phase 1 SA life time.
<seconds>
p1KeyGroup <0:DH1 Sets the IKE phase 1 key group.
| 1:DH2>
DESCRIPTION