Table of Contents
Advertisement
24-4 Menu 3 LAN Setup
24.5 Route IP Setup
The first step is to enable the IP routing in Menu 1 — General Setup.
To edit menu 1, type in 1 in the main menu and press [ENTER]. Set the Route
IP field to Yes by pressing [SPACE BAR].
Figure 24-5 Menu 1 General Setup
System Name= ?
Location=
Contact Person's Name=
Domain Name=
First System DNS Server= From ISP
IP Address= N/A
Second System DNS Server= From ISP
IP Address= N/A
Third System DNS Server= From ISP
IP Address= N/A
Edit Dynamic DNS= No
Route IP= Yes
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
24.6 Internet Access Configuration
Menu 4 allows you to enter the Internet Access information in one screen. Menu
4 is actually a simplified setup for one of the remote nodes that you can access in
menu 11. Before you configure your Contivity 251 for Internet access, you need
to collect your Internet account information.
Use the Internet Account Information table in the Quick Start Guide to record
your Internet account information. Note that if you are using PPPoA or PPPoE
encapsulation, then the only ISP information you need is a login name and
password. You only need to know the Ethernet Encapsulation Gateway IP
address if you are using ENET ENCAP encapsulation.
From the main menu, type 4 to display Menu 4 - Internet Access Setup, as
shown next.
317516-A Rev 00
Menu 1 - General Setup
Advertisement
Table of Contents
