Table of Contents
Advertisement
en | 56 | DCI 700
Injectors are not connected properly.
Check whether the injectors are connected properly electrically and hydraulically.
---Separator---
8.
Software and firmware
8.1
---Separator---
System recovery
If the current software version causes problems or if the DCI 700 is to be sold, reset the DCI 700 to factory set‐
tings.
System recovery will delete all data and settings from the DCI 700, e.g. licensing information, log files, user
settings, protocols, images.
• Internet connection required
• Keyboard required
• Customer number and password for login on DDM
---Separator---
Resetting the DCI 700 to factory settings
1. Backing up data and settings (see DCI 700 Help Center).
2. Remove the cover from the computer unit.
3. Insert the recovery USB stick into an unused USB port
86:
USB ports
4. If a keyboard is not connected, connect the keyboard to an unused USB port of the computer unit.
5. Close all running applications.
6. Shut down the Windows operating system.
7. Switch off the DCI 700 at the master switch.
8. After 30 seconds, switch on the DCI 700 at the main switch.
The computer will boot up.
Recovery starts (duration: approx. 30 minutes).
9. Read and follow the instructions on the screen.
10. When prompted, remove the recovery USB stick.
11. Shut down the computer unit by pressing any key on the keyboard.
The computer unit shuts down.
12. Switch off the DCI 700 at the master switch.
The DCI 700 is reset to the factory settings.
---Separator---
1 689 975 289 | 2020-05-06
(1)
1
USB
2
USB
458922-66_Pal
(2)
or
of the computer unit.
Robert Bosch GmbH
Hide quick links:
Advertisement
Table of Contents
