Removing The Cover From The Electronics Compartment; Removing The Cover From The Hydraulics Compartment - Bosch DCI 700 Repair Instructions

Common-rail injector test bench
Hide thumbs Also See for DCI 700:
Table of Contents

Advertisement

5.4.2

Removing the cover from the electronics compartment

1. Close the protective door.
2. Use a square box wrench to open the locking mechanisms (1). The square box wrench is included in the scope
of delivery of DCI 700.
3. Lift the cover (2), pull to the right and remove.
— If necessary, remove the protective conductor on the inside of the cover.
 69:
Removing the cover from the electronics compartment
---
5.4.3

Removing the cover from the hydraulics compartment

(2)
The cover
is secured by means of a retaining device and cannot be tilted backwards. The cover must be
removed by 2 people.
1. Use a square box wrench to open both locking mechanisms
scope of delivery of DCI 700.
Robert Bosch GmbH
2
2.
1.
1
and 3). The square box wrench is included in the
(1
DCI 700 | 45 | en
1 689 975 289 | 2020-05-06

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents