Removing Frequency Converter A1; Installing Frequency Converter A1 - Bosch DCI 700 Repair Instructions

en | 40 | DCI 700
 59: Mounting panel resting on wooden strips
---
5.3.4

Removing frequency converter A1

1. Disconnect all connection cables from the frequency converter A1 (3).
2. Remove circuit board A6 (2).
3. Remove the 4 Torx screws (1).
4. Lift and remove the frequency converter A1 (3) from the mounting panel.
1
 60: Removing the frequency converter A1
---
5.3.5

Installing frequency converter A1

1. Remove new frequency converter A1 from the packaging.
2. Remove edge guard (1) from previous frequency converter A1.
3. Attach edge guard (1) to new frequency converter.
1 689 975 289 | 2020-05-06
458929-43_Pal
2
1
3
Robert Bosch GmbH