Bosch DCI 700 Repair Instructions page 33

1
2
 47: Replacing the flow meter
7. Attach connection cable to the flow meter.
8. Using a wrench (1), loosen the hex nut on the plug. Do not remove the hex nut.
9. Turn and align the connection cable (2). The connection cable must point down.
1
2
 48: Aligning the connection cable
10. Carefully tighten the hex nut.
11. Fasten the fan assembly (2) using 2 washers and Torx screws M6 x 16.
Robert Bosch GmbH
DCI 700 | 33 | en
1 689 975 289 | 2020-05-06