en | 48 | DCI 700
73:
Removing the circuit board cover
4. Remove the protective conductor on the front circuit board cover (2).
5. Remove the 2 cylinder head screws (1) and washers.
6. Lift the front circuit board cover (2), and carefully pull it up and out.
74:
Removing the front circuit board cover
7. Remove all connection cables from circuit board A3 (2).
8. Remove both oval-head screws (1) along with their washers.
9. Pull circuit board A3 (2) up from the spacers carefully, and remove it.
1 689 975 289 | 2020-05-06
1
2
1
2
Robert Bosch GmbH