Installing The Cover On The Hydraulics Compartment - Bosch DCI 700 Repair Instructions

 79: Installing the circuit board cover
12. Attach the protective conductor to the rear circuit board cover (2).
13. Check the protective conductor in accordance with DGUV A3.
---
5.4.7

Installing the cover on the hydraulics compartment

1. Place the cover of the hydraulics compartment (2) on the test bench.
2. Use 3 Torx cylinder head screws M6 x 60 mm (1) to attach the cover of the hydraulic compartment (2).
1
2
 80: Installing the upper cover on the hydraulics compartment
Robert Bosch GmbH
1
2
1
DCI 700 | 51 | en
1 689 975 289 | 2020-05-06