Table of Contents
Advertisement
EASY LOUDNESS
Setup GUI – AUDIO PROCESSOR – Level Magic
This function block is used for loudness control of the program paths.
Expert
Clear Processing History
Initial Dynamic Gain (dB)
AGC Recovery
Low Level Behavior
Processing Threshold (dBFS) [-80 ... -70 ... -20]
Below Threshold Mode
For details regarding LevelMagic parameters see the bulletin:
"Junger processing parameter description" on the Junger web site:
http://junger-audio.com/downloads.
Loudness
Control Mode
Link
Leveler
Processing Profile
Loudness Target
for different modes ITU [0 ... -50LKFS]
Time (s/min/h)
Max Gain (dB)
Freeze Level (dBFS) [-60 ... -50 ... -20]
Transient Processor
Max Gain (dB)
Response
Response Boost
Limiter
Processing Profile
Max True Peak
(dBTP)
[ON / OFF]
<clear>
[-40 ... 0 ... 15]
[Fast / Normal]
[Hold / Release]
33
[display of the setting from
AUDIO PROCESSOR >
Setup > Loudness Mode]
[unlinked / linked]
defines the coupling of the
control circuits
[ON / OFF]
[Live / Speech / Pop / Uni /
Classic]
Level [0 ... -50dBFS]
EBU [0 ... -50LUFS]
[10, 20, 40 / 1, 2, 5, 10, 20,
40 / 1, 2]
[0 ... 10 ... 40]
[0 ... 10 ... 15]
[Soft, Mid, Hard]
<boost>
[OFF / ON]
[Live / Speech / Pop / Uni /
Classic]
[-20 ... -9.0 ... 0.0]
Advertisement
Table of Contents
