Table of Contents
Advertisement
EASY LOUDNESS
BNC Output
Audio Latency
General Features
Technical Data – Option Board Audio-over-IP DANTE™ I/O [O_DAP_DANTE_a]
Standards
Audio
Audio Sample Rate
Inputs and Outputs
Inputs
Outputs
General Features
Jitter tolerance
Impedance
Output voltage
Return loss
Output jitter
Input to Output
Power fail relay bypass (may be activated via GUI)
•
Lip-Sync compensation for processed and non-processed audio
•
signals
Dedicated routing for non-processed channels, all channels
•
(max. 16) can be routed to/from the device or looped through
Test pattern generator
•
Master-sync capable
•
ITU-R BT.1685 / ARIB STD-B39 metadata support
•
Audio-over-IP by Dante™ Digital Audio Networking Standard
24bits, transparent forwarding of PCM and compressed audio
44.1, 48, 88.2, 96kHz
2 x Gigabit Ethernet RJ45 connectors (100M/1Gbit),
primary and secondary port
Processable by D*AP8: 16 channels @ 44.1, 48kHz
Processable by D*AP4: 8 channels @ 44.1, 48, 88.2, 96kHz
Processable by D*AP8: 16 channels @ 44.1, 48kHz
Processable by D*AP4: 8 channels @ 44.1, 48, 88.2, 96kHz
AES67 compliant
•
Network master-sync can be provided by D*AP device
•
Master-sync capable (for D*AP device)
•
Non-audio detection for input channels
•
Glitch-free Dante™ audio redundancy using dual Ethernet
•
networks
> 0.7UI (Alignment)
75Ohm
0.8Vpp (typ.)
> 15dB, 5 ... 1485MHz
> 10dB, 1485 ... 2970MHz
< 0.2UI (Alignment), < 0.5UI (Timing)
Embedder and de-embedder combined
HD, 3G < 0.6ms
SD typ. 1.5ms (< 2 ms)
39
Advertisement
Table of Contents
