Table of Contents
Advertisement
Hardware Features
• 1RU
• Dual power supply
• Remote Panel
• Audio input
Audio o
•
utput
• One interface slot
• RJ45 network connector
• USB B connector
• 8 GPI/Os
• Aux power supply
• External sync IN
• Sync OUT
The EASY LOUDNESS may be purchased with SDI or AES67/Dante interface.
Software Features in general
• LevelMagic
• Fail Over
• Loudness measurement
• SNMP agent
• Remote control
Operating Manual
compact 19" processing device
second power supply for redundancy
optional X*AP RM
balanced/unbalanced AES – manual selection
balanced/unbalanced AES
I/O expansion slot for one option board at a time
100BaseT full duplex Ethernet interface
built in USB < > serial adapter to access the device service port
8 balanced inputs, 8 relay closure combined on a 25pin D-Sub
isolated 5V supply for external wiring
75Ohm input (Word Clock, AES, Black Burst, Tri-Level)
75Ohm Word Clock output
loudness management according to ITU BS.1770-1/-2/-3
EBU R128, ATSC A/85, ARIB TR-B32, Free TV OP-59, Portaria 354
automatic switch over with signal loss detection
in reference to the selected standard
SNMP v1, see D*AP4-MIB
EmBER plus protocol or X*AP RM1 remote panel, mobile UI
and legacy GPI/Os
EasyLoudness_manual_EN_170915.doc
EASY LOUDNESS
panel
1
Advertisement
Table of Contents
