Table of Contents
Advertisement
EASY LOUDNESS
System Clock
Sample Rate
Fallback Sample Rate
Sync Source Priority
Choice 1 – 4
Fallback on Sync Error
AES Select
Accept SDI Generator
Important note! It is
internal 27MHz crystal clock.
Setup GUI – SYSTEM - the preset concept in detail
The example above shows the preset concept of the EASY LOUDNESS. It is a general feature of the
device and you will come across it in almost every area. For all relevant settings one set of ON AIR
parameters and a practically unlimited number of PRESETS are available. The count depends on the NV
memory space left.
If you want to load parameters from a preset to the ON AIR area or save parameters from the ON AIR area
to a preset, you must press <load>
A dialog opens to select the desired preset. If you press <ok> the selected action will be executed.
If you press the little pencil icon the preset name turns italic and you may edit it.
To generate a new preset offline, you must click into the preset name field below the PRESET headline:
The pull down offers "Add Preset". If you select this a new entry to the list will be
generated. Clicking on the small trash bin symbol will delete that preset.
You may change the default name "Preset x" by clicking the small pencil icon.
Now the default name becomes italic and you may edit that name.
If you have selected the new preset or one of the existing presets indicated by the name displayed at the
top, you may edit the parameter values.
[Follow Input / 44.1 / 48 / 88.2 / 96]
[44.1 / 48 / 88.2 / 96]
[OFF / Internal / Sync-In WCLK / Sync-In AES
/ Interface 1 (SDI I/O or Dante) / Sync-In Black Burst/Tri-Level]
[Internal]
If the selected sync source is not available the next source will be
selected. If none of the pre-selected sync sources is available, the
source will fall back to the internal clock oscillator.
[Sync-In AES / Input AES 1/2 XLR / Input AES 1/2 BNC]
Select from which physical input the AES sync must be taken.
[ON / OFF]
For rare applications you may use the SDI generator (if an SDI I/O
interface is installed) as the sync source. In this case downstream
equipment must be synchronized to the EASY LOUDNESS.
See INTERFACES > SDI I/O interface > Setup for details.
not
possible to gen lock the SDI generator. The generator will run on its own
or <save>:
15
Advertisement
Table of Contents
