Setup Gui - Snapshots - junger EASY LOUDNESS Manual

Setup GUI – SNAPSHOTS
As mentioned previously, EASY LOUDNESS includes a sophisticated snapshot management system.
Snaphots may be triggered manually (via the X*AP RM
semi-automatically (triggered by network commands or hardware GPIs) and automatically
(triggered by a System Status Error).
Trigger
GPI 1 / Hotkey 1 ....
GPI 7 / Hotkey 7
System Status Error
Name
Routing Preset
Level Magic Preset Program 1
Level Magic Preset Program 2
Measurement
Soft LED
TEST
remote panel Hotkeys or the Mobile UI Hotkeys),
1
Enumeration of the available snapshots.
The physical GPI #1 or the Mobile UI Hotkey #1 or the X*AP Hotkey
that triggers the first snapshot
See above.
An error will trigger that snapshot that in turn can set the SDI
interface to bypass audio.
A label to distinguish between the different snapshots.
A preset can be selected here, that will change the signal routing.
You may setup such preset at the Home pane or you may select
one of the factory default presets available there:
Will change the settings of the LevelMagic for the first program
Will change the settings of the LevelMagic for the second program
Controlls the Loudness Measurement. You can Reset or
Pause/Continue a measurement cycle:
Shows the status of that line (green = active)
Pressing the respective button will test the recall of the presets
for that line of settings.
36
EASY LOUDNESS