Table of Contents
Advertisement
EASY LOUDNESS
Set up GUI – INTERFACES – SDI I/O interface – De-Embedder
Embedded Word
Clock
Set up GUI – INTERFACES – SDI I/O interface – Embedder
See SDI I/O Interface > Overview for a view of the signals available from the de-embedder and the status
of the four embedders.
Audio Sync Source
(Async HD)
[Auto / De-Embedder CH1 (DEM 1) / OFF]
OFF = synchronized to the SDI carrier.
Auto = In case of asynchronous audio it is synchronized automatically
to the SDI carrier.
DEM1= From de-embedder group 1 channel 1.
Audio Embedder
Delete Existing Data [OFF /
Group 1 – 4 Mode [OFF / AUTO – Embedding
25
The HD SDI standard allows
for asynchronous audio. This is
critical if you have decided to
synchronize the device on such
signal. Here you find a solution.
You may either use the
embedded word clock or the SDI
carrier itself as a reference.
Here you set the general
functions of the SDI embedder
ALL – New HANC Structure]
Will erase all existing audio
structures and generates a new
structure from scratch.
/ AUTO – Replace Audio
/ Delete]
OFF – will turn the embedder off.
I.e. existing signals from the SDI
input are passed through.
AUTO – Embedding will simply
exchange the audio for that
group. If a signal path from the
device is routed to the embedder,
it will be embedded. If no signal is
routed from the device, the
embedded signal from the SDI
input will be used.
AUTO – Replace Audio will
replace the data structure of that
group and will embed audio from
the device if a signal is routed to
it. If no signal is routed from the
device, the embedded signal
from the SDI input will be used.
Advertisement
Table of Contents
