Table of Contents
Advertisement
EASY LOUDNESS
Service Options
Maintenance Interface [OFF / ON]
via RPC
Telnet Server
Diagnostics
<save diagnostics file> Pressing this soft button will start the assembly of a diagnostics file.
Device Time
Date (Local)
Time (Local)
Date (UTC)
Time (UTC)
Get Time from
Primary NTP Server
Secondary NTP Server [10.110.2.7] default set to an internal NTP server from Junger Audio.
Update Rate (min)
Important Note! If it is impossible to synchronize the internal clock to one of the two NTP servers an
SNMP "ntpStatusTrap" will be issued by the SNMP agent (if enabled SYSTEM > SNMP > Enable = ON).
Update Rate (min)
For administrative use to enable communication with factory tools.
[ON / OFF]
Enables a telnet server to connect to the console interface via IP port 21.
The file will be presented in XML format for download.
If you experience unexpected behavior of the device you may be asked by
the Junger service team to send such file by e-mail for analysis.
Allows you to set the device clock. At the factory it will be set
to UTC (Coordinated Universal Time).
If you click into the Date (local) input field, a calendar tool:
appears to select month and year.
If you click into the Time (local) input field,
you will be able to set the device time.
Similar as above for local date setting.
Similar as above for local time setting.
[Manual Setting / Browser / NTP Server]
If set to NTP Server the D*AP4 will look for the below servers to
synchronize the internal clock.
[5.9.110.236] default set to a publicly accessible NTP server via internet.
This is used for device testing and may be overwritten at any time.
You can set the time interval to update via an NTP server
[1 ... 1440]
Interval of synchronizing the internal clock of the D*AP4.
13
Advertisement
Table of Contents
