Table of Contents
Advertisement
Setup GUI – SYSTEM – Reboot
Restore Factory defaults
Overwrite Current IP
Configuration
Setup GUI – INTERFACES
If you press one of the INTERFACES tabs, you will get a pop-up that gives you a warning:
Setup GUI – INTERFACES – AES I/O
will clean up the parameter and preset memory and will initialize all
parameters to their factory default values and will reset passwords
and turn authentication off.
You may exclude the current IP settings from this process
to keep your existing settings.
The EASY LOUDNESS is pre-configured to
make life easy for you as the user / operator.
I.e. you should be careful when changing
settings here because it may affect the audio
routing in the background.
We would kindly ask you not to change
interface settings here, if you are not familiar
with the results.
20
EASY LOUDNESS
Advertisement
Table of Contents
