Power Output; Input Voltage - Xantrex Freedom XC 2000 Owner's Manual

Operating During Transition Between Grid Mode and Battery Mode

Power Output

The Freedom XC can deliver up to 2000 W
grade sine wave AC power. The wattage rating applies to resistive
loads such as incandescent lights.
1
As the temperature rises, it will gradually reduce its continuous power output from 2000 W at 40°C
ambient to 1500 W before the over-temperature shutdown occurs at 60°C ambient. See Specifications on
page 85.
68
1
of continuous utility

Input Voltage

The allowable Freedom XC input battery voltage ranges are
shown in the following table:
Table 13 Input battery voltage range
Operating Battery
Condition Voltage
Full
LBCO –
Operating
17.0 V
Range
Low
Voltage < LBCO+0.2 V
Recovery
b
To set LBCO, see Adjusting Feature Settings in Configuration Mode on page 55.
c
To set LBCO Shutdown Delay Timer, see Input Voltage on page 68.
Freedom XC 2000 (230VAC) Owner's Guide
Comment
Assuming the battery is full, the
inverter/charger will operate until
battery voltage goes past below
b
LBCO and LBCO Shutdown
c
delay timer .
Inverter is able to recover and
continue to operate.