Xantrex Freedom XC 2000 Owner's Manual page 58

Basic Installation Procedures
Testing in Grid Mode
To test the Freedom XC:
With the test load from the previous test still connected and
n
operating, connect the shore power source.
The Freedom XC transfers the test load to shore power. The
n
green LED indicating grid mode turns on and the LCD screen
displays the AC MODE icon.
If the test load operates, your installation is successful.
n
NOTE: If the Power button on the Freedom XC is turned ON, the
Freedom XC will automatically supply the appliances with inverter
power if the shore power source fails or becomes disconnected.
If the Power button on the Freedom XC is turned ON and shore
power voltage is too low (less than 90 VV), the unit will transfer
to inverter power to continue running your appliances.
NOTE: Whether or not the Power button is turned ON, shore
power will pass through the Freedom XC to the output when shore
power is within normal operating range. The unit also starts
charging the battery after the transfer to grid mode.
NOTE: In the event of low or no battery voltage, shore power will
pass through the Freedom XC to the output even when shore
power is outside the normal operating range.
44 Freedom XC 2000 (230VAC) Owner's Guide