Precautions When Placing The Unit; Regulatory - Xantrex Freedom XC 2000 Owner's Manual

Precautions When Placing the
Unit
FIRE HAZARD
Do not install the inverter/charger or any part of its supplied
n
wiring in engine compartments.
For marine installation, always locate the inverter/charger
n
away from the battery and mounted separately in a well-
ventilated compartment with adequate space.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
BURN HAZARD
Avoid touching the external surfaces - heatsink may be hot.
Failure to follow these instructions can result in injury or
equipment damage.
975-0821-01-01
WARNING
CAUTION
NOTICE
RISK OF INVERTER/CHARGER DAMAGE
Never allow battery acid to drip on the inverter/charger
n
when reading gravity, or filling battery.
Never place the Freedom XC unit directly above batteries;
n
gases from a battery will corrode and damage the
inverter/charger.
Do not place a battery on top of the inverter/charger.
n
Failure to follow these instructions can result in equipment
damage.

Regulatory

The Freedom XCinverter/charger is evaluated to European Union
(EU) standards, directives, and regulations. For more information
see Regulatory approvals on page 88.
The Freedom XC inverter/charger is intended to be used for
mobile or commercial applications. This inverter/charger is
designed for marine applications only when additional drip
protection is installed in certain orientations. See the section on
Specifications for information.

Precautions When Placing the Unit

xi