Xantrex Freedom XC 2000 Owner's Manual page 7

ELECTRICAL SHOCK AND FIRE HAZARD
Installation must be done by qualified personnel to ensure
compliance with all applicable installation and electrical codes and
regulations. Instructions for installing the Freedom XC 2000
(230VAC) Inverter/Charger are provided here for use by qualified
personnel only.
Failure to follow these instructions will result in death or serious
injury.
975-0821-01-01
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, BURN, OR
ARC FLASH
Apply appropriate personal protective equipment (PPE)
n
and follow safe electrical work practices. See IEC / EN
60364-x-y series of standards.
This equipment must only be installed and serviced by
n
qualified electrical personnel.
Never operate energized with the wiring compartment
n
cover removed.
Energized from multiple sources. Before removing the
n
wiring compartment cover - identify all sources, de-
energize, and wait 2 min for circuits to discharge.
Always use a properly rated voltage sensing device to
n
confirm all circuits are de-energized.
Replace all devices, doors, and covers before turning on
n
power to this equipment.
Failure to follow these instructions will result in death or serious
injury.
Product Safety Information
DANGER
vii