Xantrex Freedom XC 2000 Owner's Manual page 8

Product Safety Information
FIRE AND EXPLOSION HAZARD
Unit's components may produce arcs or sparks.
n
Do not install near batteries, in machinery space, or in an
n
area in which ignition-protected equipment is required.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
Areas include any space containing gasoline-powered machinery,
fuel tanks, as well as joints, fittings, or other connections between
components of the fuel system.
ELECTRICAL SHOCK HAZARD
Replace the wiring compartment cover before turning on
n
power to this equipment.
Use a torque screwdriver to tighten the captive nut panel
n
screw to 0.56 N-m torque to ensure a proper earth
connection and a required tool access to the wiring
compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
viii
WARNING
WARNING
ELECTRICAL SHOCK AND FIRE HAZARD
Do not open. No serviceable parts inside. Provided with
n
integral protection against overloads. Bonding between
conduit connections is not automatic and must be
provided as part of the installation.
Read guide before installing or using.
n
Do not cover or obstruct ventilation openings.
n
Do not mount in zero-clearance compartment –
n
overheating may result.
Do not expose to rain or spray. This inverter/charger is
n
designed for marine applications only when additional drip
protection is installed in certain orientations. See
"Approved Mounting Orientations" on page 27 for more
information.
Install an RCBO (Type B) only as required by local
n
regulations.
Do not connect AC OUT to any other source of power.
n
Damage to unit may occur.
For AC IN and AC OUT, use wires suitable for at least
n
75°C.
Failure to follow these instructions can result in injury or
equipment damage.
Freedom XC 2000 (230VAC) Owner's Guide
CAUTION