1. Installation
1.1
General instructions on installation
Festo P.BE-CP-CO2-EN en 0107NH
Warning
Before carrying out installation and maintenance work,
switch off the following:
– the compressed air supply
– the operating voltage for the internal logics
– the load voltage for the valves.
You can thereby avoid:
–
uncontrolled movements of loose tubing
–
unexpected movements of the connected actuators
–
non-defined switching states of the electronic compo-
nents.
Caution
The CPV valve terminal with field bus direct connection
(CPV Direct) contains electrostatically sensitive compo-
nents.
– Do not therefore touch any contacts.
– Observe the regulations for handling electrostatically
sensitive components.
You will then prevent the electronics from being damaged.
1-3