Contents and general instructions
Target group
Service
Notes on the use of this manual
VIII
This manual is intended exclusively for technicians trained in
control and automation technology, who have experience in
installing, commissioning, programming and diagnosing
slaves on the CANopen.
Please consult your local Festo service centre if you have any
technical problems.
Please note
This manual contains the functionality of software version
V3.1.
This manual contains specific information on installing, com-
missioning, programming and diagnosing CPV valve terminals
with direct connection for CANopen.
Information on pneumatics can be found in the "Pneumatics
manual, P.BE-CPV-.. ."
Festo P.BE-CP-CO2-EN en 0107NH