Designated Use - Festo CPV GE-CO2-8 Series Electronic Manual

Contents and general instructions

Designated use

Festo P.BE-CP-CO2-EN en 0107NH
The CPV valve terminal with field bus direct connection (CPV
direct) described in this documentation is designed exclus-
ively for use as a slave on the CANopen field bus.
The valve terminal may only be used as follows:
– in accordance with designated use
– in its original state
– without any modifications by the user
– in faultless technical condition.
– The maximum values specified for pressures, tempera-
tures, electrical data, torques etc. must be observed.
Please comply with national and local safety laws and regula-
tions.
If you wish to implement an emergency stop function, please
observe the measures listed in chapter 1.5.3.
Warning
If the CP valve terminal is used as an explosion-proof oper-
ating medium, do not disconnect the electrical connections
under tension.
Plugs or adapters of the electric connections must comply
at least with protection class IP64.
VII