Commissioning On A Canopen Master - Festo CPV GE-CO2-8 Series Electronic Manual

2. Commissioning
2.2

Commissioning on a CANopen master

2-6
This chapter describes the configuration and addressing of a
CPV valve terminal on a CANopen interface or CANopen
master.
The following standards are observed:
Standards
DS 201 CAN Application Layer CAL
DS 207
DS 301, V4.01 The Draft Standard 301 is based on the CAL
based communication profile.
DS 401, V2.0 The Draft Standard 401 defines the device
profiles for input and output modules within
CANopen.
In order to understand this chapter, you should be familiar
with CANopen and the specifications DS 301 and DS 401.
Festo P.BE-CP-CO2-EN en 0107NH