1. Installation
1.5
Power supply
1.5.1 Cable for power supply
1-28
S
Use a power supply cable with sufficient cross-sectional
area.
S
Avoid long distances between the power unit and the CPV
valve terminal. Long cables reduce the voltage supplied
by the power unit.
S
If necessary, ascertain the suitable cross-sectional area
and the maximum permitted cable length.
The connection for the power supply is in the form of a plug.
The pin assignment of the plug can be found on the following
pages.
For connecting the power supply, use plugs from the Festo
range which correspond to the outer diameter of the cable
used (see Appendix A.3).
Festo P.BE-CP-CO2-EN en 0107NH