Fitting A Terminating Resistor By Using The Adapters - Festo CPV GE-CO2-8 Series Electronic Manual

1. Installation

1.4.1 Fitting a terminating resistor by using the adapters

Festo P.BE-CP-CO2-EN en 0107NH
If the CPV valve terminal to be connected is at the end of the
field bus, a terminating resistor (120 Ω, 0.25 W) must be
fitted in the field bus socket.
S
Connect the terminating resistor between the cores for
CAN_H and CAN_L.
1-27