Residual Risk Assessment; Safety Labels And Their Meaning - SaMASZ KDT 180 Operator's Manual

4.7.5. Residual risk assessment

Residual risk occurs from not complying with the instructions and safety precautions. Such risk can
be minimized by doing the following:
thorough familiarizing yourself with operator's manual,
allow no persons on the machine when operating,
allow no persons within the mower operation range,
adjust, maintain and lubricate the machine with the engine off,
only skilled persons should perform repairs of the machine,
children and strangers must keep away when the machine is operating,
When the risk of exposure to noise cannot be avoided or eliminated by any
protective means or organization of work, the employer (farmer) must:
1) provide the operator with individual means of noise protection if the noise level
in work place exceeds 80 dB.
2) provide the operator with individual means of noise protection and supervise the
correctness of its usage, if the noise level in work place reaches or exceeds 85 dB.
4.8.

Safety labels and their meaning

Safety labels are critical to safe use of this mower. They must be read, understood and followed.
Also, be sure that:
All warning decals are clean and legible
All lost or damaged decals are replaced by ordering new decals from your dealer or supplier
All persons using this mower have read the section of this manual explaining the meanings of
these labels
All spare part used for repair of the mower should have all safety labels provided by the
manufacturer.
N-01
Be extremely careful when
PTO shaft is rotating
N-05
CAUTION: belt
transmission, be extremely
careful
Operator's manual
N-02
CAUTION: cutting knives.
Approach during operation
is forbidden
N-06
CAUTION: pulling-in
parts
- 14 -
Rear disc mowers
N-03
Read the operator's manual
before putting the mower
into operation
N-07
Operating is forbidden
when any person is within
the danger area of 170'
KDT
N-04
While making repairs the
machine must be stopped
N-09
CAUTION: rotor