Hard Disks; Power Modules - H3C SecPath F10 0 Series Installation Manual

Network data
encryption module
NSQM1F1KGMC

Hard disks

CAUTION:
The hard disks are not hot swappable.
Table 12 describes the compatibility between hard disks and F10X0 firewalls.
Table 12 Hard disk compatibility with F10X0 firewalls
Hard disk
NS-SSD-480G-SATA-SFF
NS-HDD-500G-SATA-SFF
NS-HDD-1T-SATA-SFF

Power modules

The F1070/F1080/F1090 firewall comes with power module slot PWR0 installed with a filler panel
and power module slot PWR1 empty. It supports both AC and DC power modules. No power
modules are provided with the firewall. Prepare power modules for the firewall yourself as required.
The F1070/F1080/F1090 firewall supports hot swapping of power modules and 1+1 power module
redundancy. To install two power modules for the firewall, make sure they are the same model.
Table 13 Power modules available for the firewall
Firewall model
F1005/F1010
F1020/F1030/F1050/F1060
F1070/F1080 (two power modules slots
PWR0 and PWR1)
F1090 (two power modules slots PWR0
and PWR1)
Applicable firewalls and slots
•
F1090: Slots 1 through 4
•
F1020: Slot 1
•
F1030/F1050/F1060/F1070/F1080:
Slots 1 and 2
•
F1090: Slots 1 through 4
F1020/F1030/
F1005/F1010
F1050/F1060
Yes Yes
No Yes
No Yes
Available power modules
One built-in power module
Two built-in power modules
•
PSR150-A1
•
PSR150-D1
•
PSR250-12A1
•
PSR450-12AHD
•
PSR450-12D
46
Applicable software version
•
F1020/F1030/F1050/F1060/F1
070/F1080: E9337 and later
•
F1090: E8601P07 and later
F1070/F1080 F1090
Yes Yes
No No
No No