H3C SecPath F10 0 Series Installation Manual page 59

Item
Cable type
Transmission distance
Services
Micro USB console port
Table 23 Micro USB console port specifications
Item
Connector
Standard compliant
Baud rate
Cable type
Transmission distance
Services
GE copper port
Table 24 GE copper port specifications
Item
Connector
Standard compliance
Interface type
Cable type
Transmission distance
Interface speed and duplex mode
NOTE:
The media dependent interface (MDI) standard is typically used on the Ethernet port of network
adapters. The media dependent interface crossover (MDI-X) standard is typically used on hubs or
LAN switches.
GE fiber port
Table 25 GE fiber port specifications
Item
Connector type
Specification
Common asynchronous serial port cable
≤ 15 m (49.21 ft)
•
Connection to an ASCII terminal
•
Connection to the serial port of a local PC running the terminal
emulation program
•
CLI
Specification
Micro USB
Micro USB
9600 bps (default) to 115200 bps
USB console cable
≤ 10 m (32.81 ft)
•
Connection to an ASCII terminal
•
Connection to the serial port of a local PC running the terminal
emulation program
•
CLI
Specification
RJ-45
802.3, 802.3u, and 802.3ab
MDI/MDI-X autosensing
Category 5 or higher twisted pair cable
100 m (328.08 ft)
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
Specification
LC
52