Displaying The Electrical Label Information For The Firewall; Displaying The Cpu Usage Of The Firewall - H3C SecPath F10 0 Series Installation Manual

Extend BootWare
Board PFC
NandFlash PCB
HD PCB
[SubSlot 0]16GE+8SFP+2XGE
Displaying the electrical label information for the
firewall
Use the display device manuinfo command to display the electrical label information for the
firewall.
<Sysname> display device manuinfo
Slot 1 CPU 0:
DEVICE_NAME
DEVICE_SERIAL_NUMBER : 210235A1FXH164000026
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
Fan 0:
The operation is not supported on the specified fan.
Fan 1:
The operation is not supported on the specified fan.
Fan 2:
The operation is not supported on the specified fan.
Fan 3:
The operation is not supported on the specified fan.
Power 1:
The operation is not supported on the specified power.
Table 5 Output description
Field
DEVICE_NAME
DEVICE_SERIAL_NUMBER
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME

Displaying the CPU usage of the firewall

Use the display cpu-usage command to display the CPU usage of the firewall.
<Sysname> display cpu-usage
Slot 1 CPU 0 CPU usage:
3% in last 5 seconds
3% in last 1 minute
3% in last 5 minutes
Version: 1.05
Version:Ver.A
Version:Ver.A
Version:Ver.A
(Hardware)Ver.A, (Driver)1.0, (Cpld)1.0
: SecPath F1080
: 487A-DA95-91BB
: 2016-04-29
: H3C
Description
Firewall name.
Firewall serial number.
MAC address of the firewall.
Manufacturing date of the firewall.
Vendor name.
33