Hardware Management And Maintenance; Displaying Detailed Information About The Firewall; Displaying The Software And Hardware Version Information For The Firewall - H3C SecPath F10 0 Series Installation Manual

Hardware management and maintenance

NOTE:
The output depends on your firewall model. For more information about the commands used in this
chapter, see the configuration guides and command references for the firewall.

Displaying detailed information about the firewall

Use the display device verbose command to display detailed information, including the running
status and hardware version, about the firewall and its interface modules.
<Sysname> display device verbose
Status
Type
PCB 1 Ver
Software Ver
CPU Ver
CPLD_A
CPLD_B
CFCard Num
Displaying the software and hardware version
information for the firewall
Use the display version command to display software and hardware version information for the
firewall.
<Sysname> display version
H3C Comware Software, Version 7.1.064, Release 9313P11
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd. All rights reserved.
H3C SecPath F1080 uptime is 0 weeks, 0 days, 2 hours, 23 minutes
Last reboot reason: User reboot
Boot image: flash:/f1000fw-cmw710-boot- R9313P11.bin
Boot image version: 7.1.064, Release 9313P11
Compiled Nov 29 2016 16:00:00
System image: flash:/f1000fw-cmw710-system-R9313P11.bin
System image version: 7.1.064, Release 9313P11
Compiled Nov 29 2016 16:00:00
SLOT 1
CPU type: Multi-core CPU
DDR3 SDRAM Memory
Board PCB
CPLD_A
CPLD_B
Basic BootWare
: Normal
: F1080
: VER.A
: 9313P11
: 1.0
: 1.0
: 1.0
: 0
16382M bytes
Version:Ver.A
Version: 1.0
Version: 1.0
Version: 1.05
32