Displaying Electrical Label Information For The Firewall; Displaying The Cpu Usage Of The Firewall - H3C SecPath F100-X-G3 Installation Manual

DDR3 SDRAM Memory
Board PCB
Basic BootWare
Extend BootWare
[SubSlot 0]12GE
Displaying electrical label information for the
firewall
Use the
display device manuinfo
firewall.
<Sysname> display device manuinfo
Slot 1 CPU 0:
Subslot 0:
DEVICE_NAME
DEVICE_SERIAL_NUMBER : 210235A1NDH12A000022
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
Fan 0:
The operation is not supported on the specified fan.
Fan 1:
The operation is not supported on the specified fan.
Fan 2:
The operation is not supported on the specified fan.
Power 0:
The operation is not supported on the specified power.
Table5-1 Output description
Field
DEVICE_NAME
DEVICE_SERIAL_NUMBER
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME

Displaying the CPU usage of the firewall

Use the
display cpu-usage
<Sysname> display cpu-usage
Slot 1 CPU 0 CPU usage:
3% in last 5 seconds
3% in last 1 minute
3% in last 5 minutes
2032M byte
Version:Ver.A
Version: 1.02
Version: 1.02
(Hardware)Ver.A, (Driver)1.0
: F100-C-G3
: 20ef-f236-9f00
: 2019-06-06
: H3C
Description
Firewall name.
Firewall serial number.
MAC address of the firewall.
Manufacturing date of the firewall.
Vendor name.
command to display the CPU usage of the firewall.
command to display electrical label information for the
5-32