Hardware Management And Maintenance; Displaying Detailed Information About The Firewall; Displaying The Software And Hardware Version Information Of The Firewall - H3C SecPath F100-C-A-W Installation Manual

Hardware management and maintenance

NOTE:
Command outputs vary by firewall model and software version. For more information about the
commands used in this chapter, see the configuration guides and command references for the
firewall.

Displaying detailed information about the firewall

Use the
display device verbose
including the running status and hardware version.
<Sysname> display device verbose
Slot 1 SubSlot 0 info:
Status
Type
PCB 1 Ver
Software Ver
CPU Ver
CPLD_A
CPLD_B
CFCard Num
Displaying the software and hardware version
information of the firewall
Use the
display version
the firewall.
<Sysname> display version
H3C Comware Software, Version 7.1.064, Alpha 9601P03
Copyright (c) 2004-2018 New H3C Technologies Co., Ltd. All rights reserved.
H3C SecPath F100-C-A6-WL uptime is 1 week, 4 days, 2 hours, 47 minutes
Boot image: flash:/f1010fww-cmw710-boot-a9601p03.bin
Boot image version: 7.1.064, Alpha 9601P03
Compiled Nov 07 2018 16:00:00
System image: flash:/f1010fww-cmw710-system-a9601p03.bin
System image version: 7.1.064, Alpha 9601P03
Compiled Nov 07 2018 16:00:00
Feature image(s) list:
flash:/f1010fww-cmw710-devkit-a9601p03.bin, version: 7.1.064
Compiled Nov 07 2018 16:00:00
SLOT 1
CPU type: Multi-core CPU
DDR3 SDRAM Memory
command to display detailed information about the firewall,
: Normal
: F100-C-A6-WL
: VER.A
: 9601P03
: 1.0
: 0.0
: 0.0
: 0
command to display the software and hardware version information of
2032M bytes
21