Table of Contents
Advertisement
1
Getting Started
Remote Interface Configurations
The N432A can be remotely controlled via LAN, USB, and GPIB (IEEE-488)
programming interfaces. This section describes how to set up and configure these
interfaces.
Only one interface should be used at any one time.
To connect the N432A to your PC, configure and verify the connection, you can
use the Keysight IO Libraries Suite or an equivalent.
– To install the Keysight IO Libraries Suite, follow the instructions in the Keysight
– You can also access other information on Keysight IO Libraries at
For more information on configuring the remote interface connectivity, refer to the
Keysight Technologies USB/LAN/GPIB Interfaces Connectivity Guide. If you have
installed the IO Libraries Suite, you can access the connectivity guide from the IO
Libraries Control icon. Alternatively, you can access the connectivity guide via the
Web at www.keysight.com/find/connectivity.
38
Automation-Ready CD with Keysight IO Libraries Suite provided with the
standard purchase of the N432A.
www.keysight.com/find/iolib.
Keysight N432A Installation Guide
Advertisement
Table of Contents
