Check internal components
Check internal components
For checking the internal components, the PRISMAsync controller has to be opened.
Access internal components on page
See
NOTE
Please follow standard Electro Static Discharge (ESD) precautions when handling electronic
components.
Check the following:
Procedure
1.
No foreign objects are inside the PRISMAsync controller.
2.
Check for loose boards and reseat each board including DDR3 modules.
3.
Check for loose connectors and reseat each connector.
4.
Make sure that hard disk drives are connected to the correct SATA port.
Replace the Hard Disk Drives on page
See
122
Chapter 10 - Troubleshooting
68.
75.