Restart The Host Machine After Error Has Occurred - Canon imagePRESS C800 Series Technical & Service Manual

Restart the host machine after error has occurred

It is possible to restart the host machine without restarting the PRISMAsync controller. This is
useful if an error occurred in the host machine resulting in an E-code.
The customer has to follow the steps indicated at the left side on the operator panel.
Procedure
1.
Switch all finishers and paper modules off
2.
Check if power cords are plugged in
3.
Wait at least 3 seconds
4. Switch all finishers and paper modules on
5. Press the [Sleep] button to restart the host machine.
NOTE
The host machine will restart without restarting the PRISMAsync.
NOTE
In some cases the system needs to re-boot the host machine (max. 2x) to reach the correct start-
up situation.
Restart the host machine after error has occurred
Chapter 5 - Start, shutdown and restart the system 59