Canon imagePRESS C800 Series Technical & Service Manual page 41

No. Function
9 [Backup]
Create a backup of the PRISMAsync settings. Insert a USB-stick into the USB-port on
the operator panel. The system will point to this stick. After accepting the pathname
the settings are written to this USB stick. The filename will contain the time of the
backup. Always create a backup, before servicing the PRISMAsync controller.
[Restore]
10
Restore the settings that were written on the USB-stick during a backup procedure. In-
sert the USB-stick into the USB-port on the operator panel. The system will ask for a
filename.
After selecting the correct file, the settings are restored on the PRISMAsync controller.
When restoring is ready the PRISMAsync will reboot automatically.
11 [Customer Specific Solutions]
For some customers it is possible that specific solutions for their system are made.
In this screen you can disable or enable these solutions.
[Error Analysis]
12
An overview of the most recent errors is presented on the screen.
13 [POC history]
The most recent Key Operator Maintenance actions are presented on the screen
14 [Modifications]
An overview of the modifications on the system is presented on the screen. You can
view/register modifications for the host machine, the scanner and the PRISMAsync
controller.
System service mode (PRISMAsync service mode)
Additional
Chapter 4 - Using the PRISMAsync 41